Mengetahui Informasi Detail Harddisk

 •  2   • 298 

Untuk mengetahui spesifikasi harddisk, termasuk Model Number, Serial Number, dan revisi firmware, kita bisa menggunakan perintah hdparm -I. Apabila anda tidak menemukan aplikasi ini, anda dapat melakukan instalasi terlebih dahulu.

Jika anda menggunakan Ubuntu :

$ sudo apt-get update
$ sudo apt-get install hdparm

Jika anda menggunakan Red Hat / CentOS / Fedora :

# yum check-update
# yum install hdparm

Perintah yang harus kita masukkan untuk melihat spesifikasi harddisk :

[root@sissy ~]# hdparm -I /dev/hda

/dev/hda:

ATA device, with non-removable media
        Model Number:       WDC WD800BB-22JHC0
        Serial Number:      WD-WCAM9D788248
        Firmware Revision:  05.01C05
Standards:
        Supported: 6 5 4
        Likely used: 6
Configuration:
        Logical         max     current
        cylinders       16383   16383
        heads           16      16
        sectors/track   63      63
        --
        CHS current addressable sectors:   16514064
        LBA    user addressable sectors:  156301488
        device size with M = 1024*1024:       76319 MBytes
        device size with M = 1000*1000:       80026 MBytes (80 GB)
Capabilities:
        LBA, IORDY(can be disabled)
        Standby timer values: spec'd by Standard, with device specific minimum
        R/W multiple sector transfer: Max = 16  Current = 16
        Recommended acoustic management value: 128, current value: 254
        DMA: mdma0 mdma1 mdma2 udma0 udma1 udma2 udma3 udma4 *udma5
             Cycle time: min=120ns recommended=120ns
        PIO: pio0 pio1 pio2 pio3 pio4
             Cycle time: no flow control=120ns  IORDY flow control=120ns
Commands/features:
        Enabled Supported:
           *    SMART feature set
           *    Power Management feature set
           *    Write cache
           *    Look-ahead
           *    Host Protected Area feature set
           *    WRITE_BUFFER command
           *    READ_BUFFER command
           *    DOWNLOAD_MICROCODE
                SET_MAX security extension
                Automatic Acoustic Management feature set
           *    Device Configuration Overlay feature set
           *    Mandatory FLUSH_CACHE
           *    SMART error logging
           *    SMART self-test
HW reset results:
        CBLID- above Vih
        Device num = 0 determined by the jumper
Checksum: correct

Seneng baca tips ini? Ingin tips lainnya? anda bisa membaca Linux Tips 101 yang merupakan bagian dari 1001 Linux Tips.

Selamat mencoba! Have Fun!